Where the Out-of-Print is Available Again
Advanced
Now Buying
Now Buying

Black Label R-7 Case w/Standard Foam Tray Load Out

Black Label R-7 Case w/Standard Foam Tray Load Out
Category: Dice & Supplies
Publish Year: 2013
Restockable: No
Mfg. part #: BLR7-BF-SL
Type: Supplies

Black Label R-7 Case w/Standard Foam Tray Load Out
Black Label R-7 Case w/Standard Foam Tray Load Out

Description

The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin. They feature a gasketed, water and dust tight, submersible design. They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve. They are resistant to UV, solvents, fungus, corrosion and impact damage.

This case can fit 4 inches of Black Label R-7 size foam trays. With this load out option, you will receive the following foam trays:

1x 1.5 inch (38 mm) thick tray with 21x 1 1/2 x 1 inch (38 x 25 mm) cut outs, 3x 2 x 1 1/2 inch (50 x 38 mm) cut outs, 2x 2 x 1 3/4 inch (50 x 44 mm) cut outs and 3x 2 1/2 x 2 inch (63 x 50 mm) cut outs.
1x 2 inch (50 mm) thick tray with 21x 1 1/2 x 1 inch (38 x 25 mm) cut outs, 3x 2 x 1 1/2 inch (50 x 38 mm) cut outs, 2x 2 x 1 3/4 inch (50 x 44 mm) cut outs and 3x 2 1/2 x 2 inch (63 x 50 mm) cut outs.
1x Foam topper with Black Label Logo.

Tray Dimensions - 11.75W x 8.75L" (298W x 222L mm)

Inside Case Dimensions - 12W x 9L x 4.5H" (304W x 229L x 114H mm)