The revolutionary design of the Hordes bag features many great options. This bag is designed with a hard inner shell covered by a rugged outer canvas material. It was designed for airport travel and meets all FAA regulations for carryon luggage. Note: Please check your airline's carryon guidelines before travel.

The Privateer Press and Hordes logo are clearly embroidered on the bag to help show off your colors. Areas on the bag allow for award medals to be hung and velcro patches to be applied. Pockets and storage areas have been built with Hordes players in mind. A convenient area in the back of the bag will hold over 30 card sleeves. There are pockets for extra cards. Also included in the back area is a friendly place for four dry erase markers to mark your cards.

Lastly, you have the main foam area. With this load out option, you will receive 6x foam trays and 6x foam toppers with your bag. These trays were designed with the staff from Privateer Press. Each tray has sections tailored to fit the most oddly shaped models. With your Hordes bag you get:

3x 1.5 inch (38 mm) thick tray with 30x 2 x 1 1/4 inch (51 x 31 mm) cut outs and 5x 2 3/4 x 1 1/4 inch (69 x 31 mm) cut outs.

1x 2 inch (51 mm) thick tray with 16x 2 1/4 x 1 1/2 inch (57 x 38 mm) cut outs and 6x 2 1/2 x 2 inch (64 x 51 mm) cut outs.

2x 2.5 inch (64 mm) thick tray with 12x 3 x 2 1/2 inch (76 x 64 mm) cut outs.

6x Foam Toppers

Tray Dimensions - 15.5W x 8.5L" (394W x 216L mm)

These trays will hold 105 small base models, 22 medium base models, and 24 large base models.

Bag Dimensions - 17W x 11L x 14H" (432W x 279L x 356H mm)